Skip to content
DrayTek Vigor 2862n VDSL2 Security Firewall
Save Liquid error (product-badge line 32): -Infinity%
-
Physical Interfaces:
- LAN Ports (Switch)
- 5 X Gigabit Ethernet (1000Mb/s) Ports
LAN Port 5 Switchable with WAN2 (req. f/w 3.8.8 or later)
- WAN Ports:
- WAN1 : ADSL/VDSL, RJ11
- WAN2 : Gigabit Ethernet (1000Mb/s) Ethernet for load balance and WAN failover
Switchable with LAN Port 5
- WAN3 : USB 2.0 Port for 3G/4G Modem, thermometer or Printer
- WAN4 : USB 2.0 Port for 3G/4G Modem or Printer (Not on vigor 2862Ln)
- Wireless WAN - Wireless interface can provide WAN connectivity
-
Performance:
- Firewall: Up to 400Mb/s max
- IPSec VPN: Up to 60Mb/s max
-
ADSL Compatibility:
- ANSI T1.413 Issue2
- ITU-T G.992.1 G.dmt (ADSL)
- ITU-T G.992.2 G.lite
- ITU-T G.992.3 ADSL2
- ITU-T G.992.5 ADSL2+
- Annex L (READSL)
- Annex A
- Annex M
- ANFP Issue 3 Compliant/Certified (for Annex A & Annex M)
- DSL Forum : TR-048/67 & TR-100
-
VDSL Compatibility:
- BT Infinity Option 1 & Option 2 Compatible
- ITU-T VDSL2 G.993.2
- ITU-T G.993.1, G.997.1
- Band Plan: G.998, G.997
- Annex A, Annex B, Annex C
- VDSL2 Profile: 8a, 8b, 8c, 8d, 12a, 12b, 17a, 30a
- OLR, UPBO, DPBO Supported
- US0 Supported
- Loop Diagnostic Mode
- DSL Forum WT-114
-
Load Balance/Failover Features:
- Outbound Policy-Based Load-Balance to direct traffic via:
- NAT or Routing
- WAN Interface
- LAN Interface
- Specific LAN Gateway
- VPN Tunnel
- IP-Based or Session-Based Load Balance modes NEW!
- WAN Connection Fail-over
- BoD (Bandwidth on Demand)
- WAN1 PPPoE/PPPoA Fallback account, used if the primary details are unable to establish a working connection NEW!
- Configurable Load-Balance pool, specify WAN interfaces to load balance
- WAN Budget
-
Vigor 2862 ATM Protocols (DSL):
- RFC-2684/RFC-1483 Multiple Protocol over AAL5
- RFC-2516 PPP over Ethernet
- RFC-2364 PPP over AAL5
- PPPoE pass through LAN/WLAN
- PPPoE/PPPoA Relay
- Transparent bridge for MPoA
- Multiple PVC support for Triple Play Applications (up to 8 simultaneous)
- Support for RFC4638 for MTU up to 1500
-
Wireless LAN Features ('n' and 'ac' Models Only):
- 802.11g/b/n and 802.11ac (Vigor 2862ac only)
- Backward Compatibility for 802.11b/g
- Wireless Features on Vigor 2862ac:
- 802.11a
- 802.11ac (5Ghz)
- 4x4 MU-Mimo (5Ghz)
- Up to 4 Spacial Streams
- TX Beam Forming
- 1733Mb/s Link Rate (5Ghz) + 300Mb/s (2.4Ghz)
- Dual-band (2.4/5Ghz) simultaneous wireless
- 256QAM
- Multiple SSID : Create up to 4 virtual wireless LANs (independent or joined)
- Packet Aggregation and Channel Bonding
- Active Client list in Web Interface
- Wireless LAN Isolation (from VLAN groups and wired Ethernet interfaces)
- 64/128-bit WEP Encryption
- WPA/WPA2 Encryption
- Switchable Hidden SSID
- Restricted access list for clients (by MAC address)
- Time Scheduling (WLAN radio can be disabled at certain times of day)
- Time Scheduling for individual SSIDs NEW!
- Access Point Discovery
- WDS (Wireless Distribution system) for WLAN Bridging and Repeating
- 802.1x Radius Authentication
- Wireless VLAN
- Wireless Rate-Control
- Automatic Power Management
- 802.11e WMM (Wi-Fi Multimedia)
- Station Control, limit wireless client access time per day
- Airtime Fairness NEW!
- Band Steering NEW!
- Wireless WAN mode for WAN2, switchable with Ethernet (Wireless models only) NEW!
-
WAN Protocols (Ethernet):
- DHCP Client
- Static IP
- PPPoE
- PPTP
- BPA