Skip to content

DrayTek Vigor 2862 VDSL2 Security Firewall

by DrayTek
£219.99
  • Physical Interfaces:
    • LAN Ports (Switch)
      • 5 X Gigabit Ethernet (1000Mb/s) Ports
        LAN Port 5 Switchable with WAN2 (req. f/w 3.8.8 or later)
    • WAN Ports:
      • WAN1 : ADSL/VDSL, RJ11
      • WAN2 : Gigabit Ethernet (1000Mb/s) Ethernet for load balance and WAN failover
        Switchable with LAN Port 5
      • WAN3 : USB 2.0 Port for 3G/4G Modem, thermometer or Printer
      • WAN4 : USB 2.0 Port for 3G/4G Modem or Printer (Not on vigor 2862Ln)
      • Wireless WAN - Wireless interface can provide WAN connectivity
  • Performance:
    • Firewall: Up to 400Mb/s max
    • IPSec VPN: Up to 60Mb/s max
  • ADSL Compatibility:
    • ANSI T1.413 Issue2
    • ITU-T G.992.1 G.dmt (ADSL)
    • ITU-T G.992.2 G.lite
    • ITU-T G.992.3 ADSL2
    • ITU-T G.992.5 ADSL2+
    • Annex L (READSL)
    • Annex A
    • Annex M
    • ANFP Issue 3 Compliant/Certified (for Annex A & Annex M)
    • DSL Forum : TR-048/67 & TR-100
  • VDSL Compatibility:
    • BT Infinity Option 1 & Option 2 Compatible
    • ITU-T VDSL2 G.993.2
    • ITU-T G.993.1, G.997.1
    • Band Plan: G.998, G.997
    • Annex A, Annex B, Annex C
    • VDSL2 Profile: 8a, 8b, 8c, 8d, 12a, 12b, 17a, 30a
    • OLR, UPBO, DPBO Supported
    • US0 Supported
    • Loop Diagnostic Mode
    • DSL Forum WT-114
  • Load Balance/Failover Features:
    • Outbound Policy-Based Load-Balance to direct traffic via:
      • NAT or Routing
      • WAN Interface
      • LAN Interface
      • Specific LAN Gateway
      • VPN Tunnel
    • IP-Based or Session-Based Load Balance modes NEW!
    • WAN Connection Fail-over
    • BoD (Bandwidth on Demand)
    • WAN1 PPPoE/PPPoA Fallback account, used if the primary details are unable to establish a working connection NEW!
    • Configurable Load-Balance pool, specify WAN interfaces to load balance
    • WAN Budget
  • Vigor 2862 ATM Protocols (DSL):
    • RFC-2684/RFC-1483 Multiple Protocol over AAL5
    • RFC-2516 PPP over Ethernet
    • RFC-2364 PPP over AAL5
    • PPPoE pass through LAN/WLAN
    • PPPoE/PPPoA Relay
    • Transparent bridge for MPoA
    • Multiple PVC support for Triple Play Applications (up to 8 simultaneous)
    • Support for RFC4638 for MTU up to 1500
  • Wireless LAN Features ('n' and 'ac' Models Only):
    • 802.11g/b/n and 802.11ac (Vigor 2862ac only)
    • Backward Compatibility for 802.11b/g
    • Wireless Features on Vigor 2862ac:
      • 802.11a
      • 802.11ac (5Ghz)
      • 4x4 MU-Mimo (5Ghz)
      • Up to 4 Spacial Streams
      • TX Beam Forming
      • 1733Mb/s Link Rate (5Ghz) + 300Mb/s (2.4Ghz)
      • Dual-band (2.4/5Ghz) simultaneous wireless
      • 256QAM
    • Multiple SSID : Create up to 4 virtual wireless LANs (independent or joined)
    • Packet Aggregation and Channel Bonding
    • Active Client list in Web Interface
    • Wireless LAN Isolation (from VLAN groups and wired Ethernet interfaces)
    • 64/128-bit WEP Encryption
    • WPA/WPA2 Encryption
    • Switchable Hidden SSID
    • Restricted access list for clients (by MAC address)
    • Time Scheduling (WLAN radio can be disabled at certain times of day)
    • Time Scheduling for individual SSIDs NEW!
    • Access Point Discovery
    • WDS (Wireless Distribution system) for WLAN Bridging and Repeating
    • 802.1x Radius Authentication
    • Wireless VLAN
    • Wireless Rate-Control
    • Automatic Power Management
    • 802.11e WMM (Wi-Fi Multimedia)
    • Station Control, limit wireless client access time per day
    • Airtime Fairness NEW!
    • Band Steering NEW!
    • Wireless WAN mode for WAN2, switchable with Ethernet (Wireless models only) NEW!
  • WAN Protocols (Ethernet):
    • DHCP Client
    • Static IP
    • PPPoE
    • PPTP
    • BPA